Skip to main content

Bootstrap a Node

A node is any physical, virtual, or cloud device that is configured and maintained by an instance of Chef Infra Client. Bootstrapping installs Chef Infra Client on a target system so that it can run as a client and sets the node up to communicate with a Chef Infra Server. There are two ways to do this:

  • Run the knife bootstrap command from a workstation.
  • Perform an unattended install to bootstrap from the node itself, without requiring SSH or WinRM connectivity.

The following diagram shows the stages of the bootstrap operation, and the list below the diagram describes each of those stages in greater detail.

image

During a knife bootstrap bootstrap operation, the following happens:

StagesDescription
knife bootstrapEnter the knife bootstrap subcommand from a workstation. Include the hostname, IP address, or FQDN of the target node as part of this command. Knife will establish an SSH or WinRM connection with the target system and run a bootstrap script.

Get the install script from Chef

The shell script will make a request to the Chef website to get the most recent version of a the Chef Infra Client install script(install.sh or install.ps1).

Get the Chef Infra Client package from ChefThe install script then gathers system-specific information and determines the correct package for Chef Infra Client, and then downloads the appropriate package from omnitruck-direct.chef.io.
Install Chef Infra ClientChef Infra Client is installed on the target node using a system native package (.rpm, .msi, etc).

Start a Chef Infra Client run

On UNIX and Linux-based machines: The second shell script executes the chef-client binary with a set of initial settings stored within first-boot.json on the node. first-boot.json is generated from the workstation as part of the initial knife bootstrap subcommand.

On Windows machines: The batch file that is derived from the windows-chef-client-msi.erb bootstrap template executes the chef-client binary with a set of initial settings stored within first-boot.json on the node. first-boot.json is generated from the workstation as part of the initial knife bootstrap subcommand.

Complete a Chef Infra Client run

a Chef Infra Client run proceeds, using HTTPS (port 443), and registers the node with the Chef Infra Server.

The first Chef Infra Client run, by default, contains an empty run-list. A run-list can be specified as part of the initial bootstrap operation using the --run-list option as part of the knife bootstrap subcommand.

knife bootstrap

The knife bootstrap command is a common way to install Chef Infra Client on a node. The default for this approach assumes that a node can access the Chef website so that it may download the Chef Infra Client package from that location.

The Chef Infra Client installer will detect the version of the operating system, and then install the appropriate Chef Infra Client version using a single command to install Chef Infra Client and all of its dependencies, including an embedded version of Ruby, OpenSSL, parsers, libraries, and command line utilities.

The Chef Infra Client installer puts everything into a unique directory (/opt/chef/) so that Chef Infra Client will not interfere with other applications that may be running on the target machine. Once installed, Chef Infra Client requires a few more configuration steps before it can perform its first Chef Infra Client run on a node.

Run the bootstrap command

The knife bootstrap subcommand is used to run a bootstrap operation that installs Chef Infra Client on the target node. The following steps describe how to bootstrap a node using knife.

  1. Identify the FQDN or IP address of the target node. The knife bootstrap command requires the FQDN or the IP address for the node to complete the bootstrap operation.

  2. Once the workstation machine is configured, it can be used to install Chef Infra Client on one (or more) nodes across the organization using a knife bootstrap operation. The knife bootstrap command is used to SSH into the target machine, and then do what is needed to allow Chef Infra Client to run on the node. It will install the Chef Infra Client executable (if necessary), generate keys, and register the node with the Chef Infra Server. The bootstrap operation requires the IP address or FQDN of the target system, the SSH credentials (username, password or identity file) for an account that has root access to the node, and (if the operating system is not Ubuntu, which is the default distribution used by knife bootstrap) the operating system running on the target system.

    In a command window, enter the following:

    knife bootstrap 172.16.1.233 -U USERNAME --sudo
    

    where 172.16.1.233 is the IP address or the FQDN for the node, and USERNAME is the username you want to use to connect, and --sudo specifies to elevate privileges using the sudo command on UNIX-based systems.

    Then while the bootstrap operation is running, the command window will show something similar to the following:

    Enter password for ubuntu@172.16.1.233:
    
    Connecting to 172.16.1.233
    Performing legacy client registration with the validation key at /Users/USERNAME/.chef/validator.pem...
    Delete your validation key to use your user credentials for client registration instead.
    Bootstrapping 172.16.1.233
    [172.16.1.233] -----> Installing Chef Omnibus (stable/16)
    downloading https://omnitruck.chef.io/chef/install.sh
    [172.16.1.233]   to file /tmp/install.sh.1624/install.sh
    [172.16.1.233] trying wget...
    [172.16.1.233] ubuntu 20.04 aarch64
    [172.16.1.233] Getting information for chef stable 16 for ubuntu...
    [172.16.1.233] downloading https://omnitruck.chef.io/stable/chef/metadata?v=16&p=ubuntu&pv=20.04&m=aarch64
      to file /tmp/install.sh.1628/metadata.txt
    [172.16.1.233] trying wget...
    [172.16.1.233] sha1  8d89f8ac2e7f52d170be8ec1c2a028a6449d7e3a
    sha256  85cc73bed06e8d6699fc5c0b26c20d2837bf03831873444febccfc8bfa561f00
    url  https://packages.chef.io/files/stable/chef/16.1.16/ubuntu/20.04/chef_16.1.16-1_arm64.deb
    version  16.1.16
    [172.16.1.233]
    [172.16.1.233] downloaded metadata file looks valid...
    [172.16.1.233] downloading https://packages.chef.io/files/stable/chef/16.1.16/ubuntu/20.04/chef_16.1.16-1_arm64.deb
      to file /tmp/install.sh.1628/chef_16.1.16-1_arm64.deb
    [172.16.1.233] trying wget...
    [172.16.1.233] Comparing checksum with sha256sum...
    [172.16.1.233] Installing chef 16
    installing with dpkg...
    [172.16.1.233] Selecting previously unselected package chef.
    [172.16.1.233] (Reading database ... 99114 files and directories currently installed.)
    [172.16.1.233] Preparing to unpack .../chef_16.1.16-1_arm64.deb ...
    [172.16.1.233] Unpacking chef (16.1.16-1) ...
    [172.16.1.233] Setting up chef (16.1.16-1) ...
    [172.16.1.233] Thank you for installing Chef Infra Client! For help getting started visit https://learn.chef.io
    [172.16.1.233] Starting the first Chef Infra Client Client run...
    [172.16.1.233] +---------------------------------------------+
    2 product licenses accepted.
    +---------------------------------------------+
    [172.16.1.233] Starting Chef Infra Client, version 16.1.16
    [172.16.1.233] [2020-06-08T23:49:10+00:00] ERROR: shard_seed: Failed to get dmi property serial_number: is dmidecode installed?
    [172.16.1.233] Creating a new client identity for name_of_node using the validator key.
    [172.16.1.233] resolving cookbooks for run list: []
    [172.16.1.233] Synchronizing Cookbooks:
    [172.16.1.233] Installing Cookbook Gems:
    [172.16.1.233] Compiling Cookbooks...
    [172.16.1.233] [2020-06-08T23:49:17+00:00] WARN: Node name_of_node has an empty run list.
    [172.16.1.233] Converging 0 resources
    [172.16.1.233]
    [172.16.1.233] Running handlers:
    [172.16.1.233] Running handlers complete
    [172.16.1.233] Chef Infra Client finished, 0/0 resources updated in 11 seconds
    
  3. After the bootstrap operation has finished, verify that the node is recognized by the Chef Infra Server. To show only the node that was just bootstrapped, run the following command:

    knife client show NAME_OF_NODE
    

    where NODE_NAME is the name of the node that was just bootstrapped. The Chef Infra Server will return something similar to:

    admin: false
    chef_type: client
    name:  NODE_NAME
    validator: false
    

    and to show the full list of nodes (and workstations) that are registered with the Chef Infra Server, run the following command:

    knife client list
    

    The Chef Infra Server will return something similar to:

    workstation1
    workstation2
    ...
    client1
    client2
    

Validatorless and Legacy Validator Bootstraps

We recommended using “validatorless bootstrapping” to authenticate new nodes with the Chef Infra Server.

The legacy Chef Infra validator-based node bootstrapping process depended on using a shared “validatory” key throughout an organization for authenticating new nodes with the Chef Infra Server.

Shortcomings of the legacy validator process are:

  • All users share the same key for bootstrapping new systems
  • Key sharing makes key rotation difficult, if it is compromised or if an employee leaves the organization.

The “validatorless bootstrap” generates a key for each node, which is then transferred to the new node and used to authenticate with the Chef Infra Server instead of relying on a shared “validator” key.

The Chef Infra bootstrap process is validatorless by default. If you receive a warning during a bootstrap that a validator key is in use, remove the configuration for this legacy bootstrap mode. Edit your config.rb (knife.rb) file and remove any validation_key or validation_client_name entries.

Bootstrapping with chef-vault

Use the following options with a validatorless bootstrap to specify items that are stored in chef-vault:

--bootstrap-vault-file VAULT_FILE

The path to a JSON file that contains a list of vaults and items to be updated.

--bootstrap-vault-item VAULT_ITEM

A single vault and item to update as vault:item.

--bootstrap-vault-json VAULT_JSON

A JSON string that contains a list of vaults and items to be updated. –bootstrap-vault-json ‘{ “vault1”: [“item1”, “item2”], “vault2”: “item2” }’

Examples

The --bootstrap-vault-* options add the client identify of the bootstrapping node to the permissions list of the specified vault item. This enables the newly-bootstrapped Chef Infra Client to be able to read items from the vault. Only a single client is authorized at a time for access to the vault. (The -S search query option with the knife vault create subcommand does the same.)

Recreate a data bag item

The following example shows how to recreate a data bag item:

knife vault delete sea power
Do you really want to delete sea/power? (Y/N) Y
Deleted chef_vault_item[sea/power]

echo "{\"some\":\"content for them\"}" > sea-power-content.json

cat sea-power-content.json
{"some":"content for them"}

knife vault create sea power -M client -A sean_horn,angle -J sea-power-content.json

No clients, because the -S option was not specified while creating the vault.

At this time, only the users sean_horn and angle are authorized to read and manage the vault.

knife vault show sea power  --mode client -p all
admins:
  sean_horn
  angle
clients:
id: power
search_query:
some:  content for them

It is definitely an encrypted databag, see?

knife data_bag show sea power
WARNING: Encrypted data bag detected, but no secret provided for decoding. Displaying encrypted data.
id: power
some:
cipher:  aes-256-cbc
encrypted_data: c7Axnyg+1KDxBPOZdYN9QuIYx6dmSmK70unAQbn12Lygvsv2g9DPJJbueXVh
+yxL
iv: ONoVR7OjPZiAzaqOZ30bjg==
version: 1

Use –bootstrap-vault-file

Use the sea:power recreation step above first, to follow the difference in the vault permissions.

echo "{\"sea\":\"power\"}" > sea-power-bootstrap-vault-file.json

knife bootstrap localhost -p 2200 -N ubuntu-20.04 -r 'role[group1]' --connection-user vagrant --sudo --bootstrap-vault-file sea-power-bootstrap-vault-file.json
Node ubuntu-20.04 exists, overwrite it? (Y/N) Y
Client ubuntu-20.04 exists, overwrite it? (Y/N) Y
Creating new client for ubuntu-20.04
Creating new node for ubuntu-20.04
Connecting to localhost
localhost -----> Existing Chef installation detected
localhost Starting first Chef Infra Client run...
localhost Starting Chef Infra Client, version 12.2.1
localhost resolving cookbooks for run list: ["delay-test-reporting"]
localhost Synchronizing Cookbooks:
localhost   - delay-test-reporting
localhost Compiling Cookbooks...
localhost Converging 1 resources
localhost Recipe: delay-test-reporting::default
localhost   * execute[sleep 30] action run
localhost     - execute sleep 30
localhost
localhost Running handlers:
localhost Running handlers complete
localhost Chef Infra Client finished, 1/1 resources updated in 34.307257232 seconds

The client ubuntu-20.04 was added to the chef-vault during the bootstrap.

knife vault show sea power  --mode client -p all
admins:
  sean_horn
  angle
clients:  ubuntu-20.04
id: power
search_query:
some:  content for them

Use –bootstrap-vault-item

Use the sea:power re-creation step above first, to follow the difference in the vault permissions.

knife bootstrap localhost -p 2200 -N ubuntu-20.04 -r 'role[group1]' --connection-user vagrant --sudo --bootstrap-vault-item sea:power
Node ubuntu-20.04 exists, overwrite it? (Y/N) Y
Client ubuntu-20.04 exists, overwrite it? (Y/N) Y
Creating new client for ubuntu-20.04
Creating new node for ubuntu-20.04
Connecting to localhost
localhost -----> Existing Chef installation detected
localhost Starting first Chef Infra Client run...
localhost Starting Chef Infra Client, version 12.2.1
localhost resolving cookbooks for run list: ["delay-test-reporting"]
localhost Synchronizing Cookbooks:
localhost   - delay-test-reporting
localhost Compiling Cookbooks...
localhost Converging 1 resources
localhost Recipe: delay-test-reporting::default
localhost   * execute[sleep 30] action run
localhost     - execute sleep 30
localhost
localhost Running handlers:
localhost Running handlers complete
localhost Chef Infra Client finished, 1/1 resources updated in 34.322229474
seconds

During the above run, the sea:power vault item was updated with the ubuntu-20.04 client during the validatorless bootstrap. Previously, it only had the two admins authorized to view the content

knife vault show sea power -p all
admins:
  sean_horn
  angle
clients:  ubuntu-20.04
id: power
search_query: role:stuff
some:  secret stuff for them

Then, let’s check the ubuntu-20.04 client. The client itself can decrypt and read the encrypted databag contents as well using the embedded knife CLI in the Chef Infra Client package.

sudo /opt/chef/bin/knife vault show sea power -c /etc/chef/client.rb -M client -p all
admins:
  sean_horn
  angle
clients:  ubuntu-20.04
id: power
search_query: role:group1
some:  secret stuff for them

Success! The client is authorized to view the content of the sea:power databag item

Use –bootstrap-vault-json

Use the sea:power re-creation step above first, to follow the difference in the vault permissions.

knife bootstrap localhost -p 2200 -N ubuntu-20.04 -r 'role[group1]' --connection-user vagrant --sudo --bootstrap-vault-json '{"sea": "power"}'
Node ubuntu-20.04 exists, overwrite it? (Y/N) Y
Client ubuntu-20.04 exists, overwrite it? (Y/N) Y
Creating new client for ubuntu-.04
Creating new node for ubuntu-20.04
Connecting to localhost
localhost -----> Existing Chef installation detected
localhost Starting first Chef Infra Client run...
localhost Starting Chef Infra Client, version 12.2.1
localhost resolving cookbooks for run list: ["delay-test-reporting"]
localhost Synchronizing Cookbooks:
localhost   - delay-test-reporting
localhost Compiling Cookbooks...
localhost Converging 1 resources
localhost Recipe: delay-test-reporting::default

localhost   * execute[sleep 30] action run
localhost     - execute sleep 30
localhost
localhost Running handlers:
localhost Running handlers complete
localhost Chef Infra Client finished, 1/1 resources updated in 33.732784033 seconds
knife vault show sea power -M client -p all
admins:
  sean_horn
  angle
clients:  ubuntu-20.04
id: power
search_query:
some:  content for them

Unattended Installs

Chef Infra Client can be installed using an unattended bootstrap. This allows Chef Infra Client to be installed from itself, without requiring SSH. For example, machines are often created using environments like AWS Auto Scaling, AWS CloudFormation, Rackspace Auto Scale, and PXE. In this scenario, using tooling for attended, single-machine installs like knife bootstrap or knife CLOUD_PLUGIN create is not practical because the machines are created automatically and someone cannot always be on-hand to initiate the bootstrap process.

When Chef Infra Client is installed using an unattended bootstrap, remember that Chef Infra Client:

  • Must be able to authenticate to the Chef Infra Server
  • Must be able to configure a run-list
  • May require custom attributes, depending on the cookbooks that are being used
  • Must be able to access the chef-validator.pem so that it may create a new identity on the Chef Infra Server
  • Must have a unique node name; Chef Infra Client will use the FQDN for the host system by default

When Chef Infra Client is installed using an unattended bootstrap, it may be built into an image that starts Chef Infra Client on boot, or installed using User Data or some other kind of post-deployment script. The type of image or User Data used depends on the platform on which the unattended bootstrap will take place.

Bootstrapping with User Data

The method used to inject a user data script into a server will vary depending on the infrastructure platform being used. For example, on AWS you can pass this data in as a text file using the command line tool.

The following user data examples demonstrate the process of bootstrapping Windows and Linux nodes.

PowerShell User Data

## Set host file so the instance knows where to find chef-server
$hosts = "1.2.3.4 hello.example.com"
$file = "C:\Windows\System32\drivers\etc\hosts"
$hosts | Add-Content $file

## Download the Chef Infra Client
$clientURL = "https://packages.chef.io/files/stable/chef/12.19.36/windows/2012/chef-client-<version-here>.msi"
$clientDestination = "C:\chef-client.msi"
Invoke-WebRequest $clientURL -OutFile $clientDestination

## Install the Chef Infra Client
Start-Process msiexec.exe -ArgumentList @('/qn', '/lv C:\Windows\Temp\chef-log.txt', '/i C:\chef-client.msi', 'ADDLOCAL="ChefClientFeature,ChefSchTaskFeature,ChefPSModuleFeature"') -Wait

## Create first-boot.json
$firstboot = @{
   "run_list" = @("role[base]")
}
Set-Content -Path c:\chef\first-boot.json -Value ($firstboot | ConvertTo-Json -Depth 10)

## Create client.rb
$nodeName = "lab-win-{0}" -f (-join ((65..90) + (97..122) | Get-Random -Count 4 | % {[char]$_}))

$clientrb = @"
chef_server_url        'https://chef-server/organizations/my-org'
validation_client_name 'validator'
validation_key         'C:\chef\validator.pem'
node_name              '{0}'
"@ -f $nodeName

Set-Content -Path c:\chef\client.rb -Value $clientrb

## Run Chef
C:\opscode\chef\bin\chef-client.bat -j C:\chef\first-boot.json

Bash User Data

#!/bin/bash -xev

# Do some chef pre-work
/bin/mkdir -p /etc/chef
/bin/mkdir -p /var/lib/chef
/bin/mkdir -p /var/log/chef

# Setup hosts file correctly
cat >> "/etc/hosts" << EOF
10.0.0.5    compliance-server compliance-server.automate.com
10.0.0.6    infra-server infra-server.automate.com
10.0.0.7    automate-server automate-server.automate.com
EOF

cd /etc/chef/

# Install chef
curl -L https://omnitruck.chef.io/install.sh | bash || error_exit 'could not install chef'

# Create first-boot.json
cat > "/etc/chef/first-boot.json" << EOF
{
   "run_list" :[
   "role[base]"
   ]
}
EOF

NODE_NAME=node-$(cat /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w 4 | head -n 1)

# Create client.rb
cat > '/etc/chef/client.rb' << EOF
log_location            STDOUT
chef_server_url         'https://aut-chef-server/organizations/my-org'
validation_client_name  'my-org-validator'
validation_key          '/etc/chef/my_org_validator.pem'
node_name               "${NODE_NAME}"
EOF

chef-client -j /etc/chef/first-boot.json

It is important that settings in the client.rb filechef_server_url, http_proxy, and so on are used—to ensure that configuration details are built into the unattended bootstrap process.

Setting the initial run-list

A node’s initial run-list is specified using a JSON file on the host system. When running Chef Infra Client as an executable, use the -j option to tell Chef Infra Client which JSON file to use. For example:

chef-client -j /etc/chef/file.json --environment _default

where file.json is similar to:

{
  "resolver": {
    "nameservers": [ "10.0.0.1" ],
    "search":"int.example.com"
  },
  "run_list": [ "recipe[resolver]" ]
}

and where _default is the name of the environment that is assigned to the node.

Warning

This approach may be used to update normal attributes, but should never be used to update any other attribute type, as all attributes updated using this option are treated as normal attributes.

Edit this page on GitHub.

Thank you for your feedback!

×









Search Results