Skip to main content

sudo Resource

This page is generated from the Chef Infra Client source code.
To suggest a change, edit the sudo.rb file and submit a pull request to the Chef Infra Client repository.

All Infra resources page


Use the sudo resource to add or remove individual sudo entries using sudoers.d files. Sudo version 1.7.2 or newer is required to use the sudo resource, as it relies on the #includedir directive introduced in version 1.7.2. This resource does not enforce installation of the required sudo version. Chef-supported releases of Ubuntu, SuSE, Debian, and RHEL (6+) all support this feature.

New in Chef Infra Client 14.0.

Syntax


The full syntax for all of the properties that are available to the sudo resource is:

sudo 'name' do
  command_aliases        Array # default value: []
  commands               Array # default value: ["ALL"]
  config_prefix          String # default value: "Prefix values based on the node's platform"
  defaults               Array # default value: []
  env_keep_add           Array # default value: []
  env_keep_subtract      Array # default value: []
  filename               String # default value: 'name' unless specified
  groups                 String, Array # default value: []
  host                   String # default value: "ALL"
  noexec                 true, false # default value: false
  nopasswd               true, false # default value: false
  runas                  String # default value: "ALL"
  setenv                 true, false # default value: false
  template               String
  users                  String, Array # default value: []
  variables              Hash
  visudo_binary          String # default value: "/usr/sbin/visudo"
  action                 Symbol # defaults to :create if not specified
end

where:

  • sudo is the resource.
  • name is the name given to the resource block.
  • action identifies which steps Chef Infra Client will take to bring the node into the desired state.
  • command_aliases, commands, config_prefix, defaults, env_keep_add, env_keep_subtract, filename, groups, host, noexec, nopasswd, runas, setenv, template, users, variables, and visudo_binary are the properties available to this resource.

Actions


The sudo resource has the following actions:

:create
Create a single sudoers configuration file in the sudoers.d directory. (default)
:delete
Remove a sudoers configuration file from the sudoers.d directory.
:nothing
This resource block does not act unless notified by another resource to take action. Once notified, this resource block either runs immediately or is queued up to run at the end of a Chef Infra Client run.

Properties


The sudo resource has the following properties:

command_aliases
Ruby Type: Array | Default Value: []

Command aliases that can be used as allowed commands later in the configuration.

commands
Ruby Type: Array | Default Value: ["ALL"]

An array of full paths to commands this sudoer can execute.

config_prefix
Ruby Type: String | Default Value: Prefix values based on the node's platform

The directory that contains the sudoers configuration file.

defaults
Ruby Type: Array | Default Value: []

An array of defaults for the user/group.

env_keep_add
Ruby Type: Array | Default Value: []

An array of strings to add to env_keep.

env_keep_subtract
Ruby Type: Array | Default Value: []

An array of strings to remove from env_keep.

filename
Ruby Type: String | Default Value: The resource block's name

The name of the sudoers.d file if it differs from the name of the resource block

groups
Ruby Type: String, Array | Default Value: []

Group(s) to provide sudo privileges to. This property accepts either an array or a comma separated list. Leading % on group names is optional.

host
Ruby Type: String | Default Value: ALL

The host to set in the sudo configuration.

noexec
Ruby Type: true, false | Default Value: false

Prevent commands from shelling out.

nopasswd
Ruby Type: true, false | Default Value: false

Allow sudo to be run without specifying a password.

runas
Ruby Type: String | Default Value: ALL

User that the command(s) can be run as.

setenv
Ruby Type: true, false | Default Value: false

Determines whether or not to permit preservation of the environment with sudo -E.

template
Ruby Type: String

The name of the erb template in your cookbook, if you wish to supply your own template.

users
Ruby Type: String, Array | Default Value: []

User(s) to provide sudo privileges to. This property accepts either an array or a comma separated list.

variables
Ruby Type: Hash

The variables to pass to the custom template. This property is ignored if not using a custom template.

visudo_binary
Ruby Type: String | Default Value: /usr/sbin/visudo

The path to visudo for configuration verification.


Common Resource Functionality


Chef resources include common properties, notifications, and resource guards.

Common Properties

The following properties are common to every resource:

compile_time

Ruby Type: true, false | Default Value: false

Control the phase during which the resource is run on the node. Set to true to run while the resource collection is being built (the compile phase). Set to false to run while Chef Infra Client is configuring the node (the converge phase).

ignore_failure

Ruby Type: true, false, :quiet | Default Value: false

Continue running a recipe if a resource fails for any reason. :quiet will not display the full stack trace and the recipe will continue to run if a resource fails.

retries

Ruby Type: Integer | Default Value: 0

The number of attempts to catch exceptions and retry the resource.

retry_delay

Ruby Type: Integer | Default Value: 2

The delay in seconds between retry attempts.

sensitive

Ruby Type: true, false | Default Value: false

Ensure that sensitive resource data is not logged by Chef Infra Client.

Notifications

notifies

Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may notify another resource to take action when its state changes. Specify a 'resource[name]', the :action that resource should take, and then the :timer for that action. A resource may notify more than one resource; use a notifies statement for each resource to be notified.

If the referenced resource does not exist, an error is raised. In contrast, subscribes will not fail if the source resource is not found.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before

Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.

:delayed

Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.

:immediate, :immediately

Specifies that a notification should be run immediately, for each resource notified.

The syntax for notifies is:

notifies :action, 'resource[name]', :timer
subscribes

Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may listen to another resource, and then take action if the state of the resource being listened to changes. Specify a 'resource[name]', the :action to be taken, and then the :timer for that action.

Note that subscribes does not apply the specified action to the resource that it listens to - for example:

file '/etc/nginx/ssl/example.crt' do
  mode '0600'
  owner 'root'
end

service 'nginx' do
  subscribes :reload, 'file[/etc/nginx/ssl/example.crt]', :immediately
end

In this case the subscribes property reloads the nginx service whenever its certificate file, located under /etc/nginx/ssl/example.crt, is updated. subscribes does not make any changes to the certificate file itself, it merely listens for a change to the file, and executes the :reload action for its resource (in this example nginx) when a change is detected.

If the other resource does not exist, the subscription will not raise an error. Contrast this with the stricter semantics of notifies, which will raise an error if the other resource does not exist.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before

Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.

:delayed

Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.

:immediate, :immediately

Specifies that a notification should be run immediately, for each resource notified.

The syntax for subscribes is:

subscribes :action, 'resource[name]', :timer

Guards

A guard property can be used to evaluate the state of a node during the execution phase of a Chef Infra Client run. Based on the results of this evaluation, a guard property is then used to tell Chef Infra Client if it should continue executing a resource. A guard property accepts either a string value or a Ruby block value:

  • A string is executed as a shell command. If the command returns 0, the guard is applied. If the command returns any other value, then the guard property is not applied. String guards in a powershell_script run Windows PowerShell commands and may return true in addition to 0.
  • A block is executed as Ruby code that must return either true or false. If the block returns true, the guard property is applied. If the block returns false, the guard property is not applied.

A guard property is useful for ensuring that a resource is idempotent by allowing that resource to test for the desired state as it is being executed, and then if the desired state is present, for Chef Infra Client to do nothing.

Properties

The following properties can be used to define a guard that is evaluated during the execution phase of a Chef Infra Client run:

not_if

Prevent a resource from executing when the condition returns true.

only_if

Allow a resource to execute only if the condition returns true.

Examples


The following examples demonstrate various approaches for using the sudo resource in recipes:

Grant a user sudo privileges for any command

sudo 'admin' do
  user 'admin'
end

Grant a user and groups sudo privileges for any command

sudo 'admins' do
  users 'bob'
  groups 'sysadmins, superusers'
end

Grant passwordless sudo privileges for specific commands

sudo 'passwordless-access' do
  commands ['/bin/systemctl restart httpd', '/bin/systemctl restart mysql']
  nopasswd true
end
Edit this page on GitHub.

Thank you for your feedback!

×









Search Results